pool painting

Easy Methods to Paint a Concrete Pool 

The interior surface of your concrete pool is now failing. There are several quotes that you receive from pool companies for pool painting in Melbourne. These quotes range from a few thousand to several thousand to refinish the pool. But, you do not have the money for pool painting contractors in Melbourne to take on the job for the moment. You must not ignore this problem as the interior surface of the pool is failing, and you need to do something to prevent this problem from further damaging your pool structure. This is where pool painting contractors ensure that you get the job done and stop the problem entirely.

If you are worried about refinishing costs for the interior surface of the pool, then you would never need structural repair estimates. Also, in case you feel like giving up and just filling up the pool, then it’s not exactly a straightforward process that you might think it would be. All the stitches of the pool would have to be removed from the ground, and this can cost you thousands of dollars. Therefore, you should consider a cost-effective approach to refinishing your own pool. It takes 1 or 2 days of work to paint a concrete pool at the cost of less than $1000 with no major skills or tools required.

If you find this interesting, then you should go ahead and give it a shot. A concrete pool that needs renovation can be challenging. Finding some qualified help is difficult in some areas, and when you get into the interior surfaces on concrete swimming pools, there’s a lot that can go wrong, especially if you are uninformed.

There is no simple way to avoid costs associated with concrete pool maintenance. But, here you will get a course of action that can help your pool life last a decade or more. This is before you need to hire a professional and pay for a full-scale renovation.

Based on the amount of work that you put in, you will see the type of transformation that you are looking for though this is not possible for every concrete pool and every interior finish type. Most concrete pools can be repainted regardless of how neglected or dirty the pool is.

Types of Interior Pool Finishes

If you are wondering if this painting process is an option, then you need to know about the different types of the interior pool surface and what is the kind of surface that you already have. By identifying which is the current interior surface, it plays a big part in repainting the pool.

Most limited liability pool painting contractors choose what they are going to apply to the pool surface. In case there is any doubt about whether the new surface will adhere then it is better to sandblast the pool surface. There are times when sandblasting is the only option. This is especially the case with very deteriorated and old pools. After this is done, you can then choose to paint it over. Sandblasting could cost you several thousands of dollars, and if you can avoid it and live with less than perfect results, then this is the way to go forward. Check out this 5 options for your concrete pool:

  1. Plaster:This is a common interior surface for most concrete swimming pools and for the construction of new concrete pools. Here, a smooth but dense mortar application is used with a hard-trowel technique, and this increases the pool’s water retentiveness. Most new built pools use this as the most common interior surface. This is normally white but sometimes comes in other colours and is half to one inch thick and applied to the structural concrete shell of the pool. The pool plaster is a generic term and is also known as quartzite, marblite or marcite and falls under this category of smooth mortar finishes.
  1. Epoxy Paint:This is a common interior surface for the aftermarket pool finish market. In this case, replaster costs are very expensive, and this is why epoxy paints are considered as they cost half of the amount of plastering. This epoxy paint lasts for 5 to 7 years and is a reasonable option for the pool owners. The only problem that it has is that it can only be applied to bare concrete or plaster or on previous epoxy pool paints.
  1. Chlorinated Rubber – Synthetic rubber or chlorinated rubber provide the same durability, quality and process with epoxy paints. Sometimes, it can be difficult to tell the difference between the two based paint in your pool. These paints are not compatible, and if you use the wrong one to cover the old paint, then you would get delamination and failure of a new layer which would be a costly mistake. Since there is no way to test rubber versus epoxy paints, most pool contractors require sandblasting to be absolutely sure that the new surface will adhere.
  1. Acrylic Paint – This form of interior surface paint has the shortest lifespan, but it is also the easiest to apply since they are applied to a damp surface. Most other paints require an extremely moisture-controlled environment that is difficult to achieve even for professionals. Acrylic paint should not be applied to the rough concrete shells as it does not build up at all. But, this is an ideal option for refinishing pools with an existing interior surface that is failing. You can choose to grind, parge or smoothen the rough concrete before you use the paint. There will be patches that will be visible after the final coating is done.
  1. Pebble– In case you have a pebble surface for your pool, then the process outlined in this page will not apply to the pool. Painting of a rough surface which is exposed to pebble finishes is not idealistic.

Painting A Pool With Acrylic Paint

In case you have tiles around the pool perimeter then you should cover the bottom row with green painters tape. You must put on and take off the tape on the same day to prevent the sun from melting the adhesive into the tiles.

There should be at least 2 coats of paint with 2 to 3 hours of drying time between the coats of paint. You should start at the deep end and then work your way to the shallow end to be able to come out of the pool after painting it.

Once the second coat is done, you should remove the painter’s tape and allow the pool to dry for 3 days before you fill water in the pool. The paint should be applied in the morning, and the second coat should be done in the evening to avoid direct sunlight. Shake and stir the paint well before you use it as the paint could separate while sitting.

The amount of paint needed is based on the size of the pool and how rough the pool’s surface is. The pool plaster is initially very smooth, and as it ages, it gets rough and rougher. A rough pool surface would normally take nearly 40% more paint to cover as compared to a smooth surface. Also, you should order more paint than you need as it has a long shelf life that prevents it from freezing.

If you require pool painting in Melbourne, then our pool painting contractors at Spotless Trades will assure you that job is done perfectly. Why go anywhere else? Trust the professionals by giving us a call at 0426 204 090, and we will give you a quotation and complete the job in no time.

No Comments

Post A Comment

?